Auto Parts - Car and Truck Accessories
DC to AC Power Inverters


Vector 1200 Watt DC to AC Power Inverter

Here is the Vector 1200 Watt DC to AC Power Inverter, auto parts car truck accessories that you were searching for and sound systems, body kits, performance parts, starters, radiators, bumpers, consoles and Euro style parts, here is the right place for on-line shopping.

Vector 1200 Watt DC to AC Power Inverter
Powers up to 11 AMPS! FEATURES: 1200 Watt Continuous Power 2000 Watt Peak Converts 12 Volt DC to 110 Volt AC Shock-resisting gfci-protected outlets Built-In Voltage and Amperage Meters Three Shock Resistant UL-Listed GFCI Protected Outlets Three North American, U-Ground Outlets. Features High Surge Capability to Start Heavy Loads, Such as Lamps, Motors and Other Inductive Loads Powerful Internal HIGH-SPEED Cooling Fan with High Volume, Vented Housing Lower Power Consumption Ensures Longer Battery Life High Voltage Protection Automatically Turns Unit Off When Overload Protection Automatically Turns Unit Off When Continuous Draw Exceeds 1200 Watts Low Battery Alarm Automatically Sounds When Battery Discharges to 10.6 Volts Low Battery Shutdown Automatically Occurs When Battery Discharges to 10.0 Volts Preventing Damage to Battery Short Circuit Protection Automatically Turns Unit Off When a Short is Detected Electronic Circuit Protection Prevents Damage Due to Overloading or Insufficient Ventilation


Heavy-Duty Tie Rods And Drag Link AssembliesHeavy-Duty Tie Rods And Drag Link Assemblies
HEAVY-DUTY TIE RODS AND DRAG LINK ASSEMBLIES No more bent tie rods! Huge in size, big in protection over the factory original! Tube has no seams or welds to fail so that means goodbye to bent rods! A big 1-1/4" OD SAE 1018 steel that is cold rolled, pierced and drawn through dies to produce a 1/4" of wall thickness. Strong yield strength at 53,000 lbs. per square inch. It can take the strain without an increase in stress. Each assembly comes with 2 heavy-duty 7/8" rod ends that have standard tapered OE ends to fit stock knuckle applications. 1-ton strength so there's no modification needed to the knuckles. All rod ends come with dust shields, castle nuts, cotter pins, 2 jamb nuts and Zerk fittings. Kit includes 4 tie rod ends, heavy-duty seamless tubes and connectors, assembled and ready to install.


Chevrolet (Chevy) Impala SS 94-96; Sport Type Coil Lowering Spring (2" Drop)Chevrolet (Chevy) Impala SS 94-96; Sport Type Coil Lowering Spring (2" Drop)
Sport Type lowering springs with 2" Drop for your Chevrolet (Chevy) Impala SS; 1994, 1995 and 1996.



Copyright 2004 - 2007