Jeep Accessories & Parts - Wheels - Wrangler Accessory - Cherokee Part

2.5” Leveling System

Jeep Parts And Accessories - This system features machined coil spring spacer mounts designed to level the vehicle front to rear. Utilizing the stock front coil springs provides a factory like ride with increased height and a quick installation.

Fabtech’s Angled & Flat Spare Tire Mounts

Jeep Parts And Accessories - The Angled Spare Tire Mount is constructed of 1 ¼” steel tubing and MIG welds at the joints for long lasting strength and durability. It allows you to securely carry a full size spare tire, up to 35”tall, in the bed of your truck.

The Flat Tire Mount allows you to position a tire anywhere in the bed of your truck. You can mount the base plate directly in you bed for permanent mount, or spend a little more time placing the mounting plate underneath your bed, allowing you to remove your spare tire without anyone knowing it was ever there.

Ford 2WD 4" or 6" Basic System

Jeep Parts And Accessories - Utilizing the vehicle’s stock I beams and radius arms the heavy duty 1/4" thick brackets relocate these components with extended length coil springs for increased ride height and proper front suspension geometry. System includes heavy duty brackets, drop pitman arm, front and rear performance shocks and a rear block kit. Each Basic System is only available in a single front shock configuration.

Ford 4WD 6” Basic System

Jeep Parts And Accessories -  Designed for the budget minded enthusiast, this system allows the installation of our 6” Coil Spring Kit while utilizing the stock Radius Arms. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, rear blocks, u bolt kit and more.

Dodge 4WD 3” Basic System

Jeep Parts And Accessories - System features heavy duty steel coil spring spacers for lift without having to change the factory coil springs. Replacement 1-3/4” diameter lower control links provide proper caster and strength for offroad use. System includes replacement bump stops, blocks and u bolts.

6” / 8” Radius Arm System

Jeep Parts And Accessories - These patent pending Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options include 6” or 8” replacement Coil Springs or Fabtech’s high end Dirt Logic adjustable Coilover Shock conversion. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Bump Stop mounts, Steering Stabilizer bracket, Billet sway bar links and drop brackets and more. Rear lift options include a block and u bolt kit or replacement leaf springs.

6” / 8” 4 Link System

Jeep Parts And Accessories - For the ultimate in suspension performance for the Super Duty we offer a bolt on 4 Link System that provides unsurpassed articulation and wheel travel. These 2” diameter heavy wall links feature race style 1” Uniballs for superior strength. Thick 1/4” steel brackets secure the 4 Links to the frame without cutting or welding. This 4 Link system allows the use of our replacement Coil Springs or our Dirt Logic adjustable Coilover Shock conversion. System also includes Billet Sway bar links, Trac Bar relocation bracket, Pitman Arm and more. Rear lift options include a block and u bolt kit or replacement leaf springs.

GM 7” Performance Crossmember System

GM replaced coil springs with torsion bars on the front suspension of their 2WD C1500 trucks. We offer a 7” Performance System for this new suspension platform that utilizes our proven arched lower control arm crossmembers and extended length steering knuckles. System includes billet sway bar links, impact struts and more.

GM 7.5" 2WD Performance Crossmember System

Jeep Parts And Accessories - This new 2WD system uses our proven crossmember and steering knuckle technology found in our 4WD IFS systems for easy installation. The factory upper control arm remains in the stock frame pocket attaching to a new extended length cast spindle with the lower control arm relocated into the one piece crossmembers. An extended length smooth ride coil spring provides increased ride height for better clearance. Rear lift is comprised of a 5" block and u bolt kit. System includes extended length brake hoses, F&R Bump Stop mounts and more.

 GM 6" 2WD Performance Crossmember System

GM SUV lift is accomplished via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4" thick, high arched lower control arm crossmembers. Solid steel billet sway bar end links with urethane bushings retain the factory front sway bar angle while the stock upper control arms and steering center link are retained in the factory position. Rear system includes extended length coil springs, track bar bracket and shock relocation mounts for the three styles of OE rear shocks.

F150 2WD 6” Performance Crossmember System

Jeep Parts And Accessories - Using our arched lower control arm crossmembers and cast extended length spindle technology this system provides superior ground clearance with a smooth ride. Included in this system are 2.25” monotube front shocks that utilize the stock coil springs with anodized billet coil seats for a compliant on and off-road ride. Other features include lower control arm eccentric cams for easy alignment, sway bar drop brackets, 2” double pin cast iron rear lift blocks and u bolts.

F150 2WD 7.5" Performance Crossmember System

Jeep Parts And Accessories - This system uses our proven crossmember and steering knuckle technology found in our 4WD IFS systems. The factory upper control arm remains in the stock frame pocket attaching to a new extended length cast spindle with the lower control arm relocated into the one piece crossmembers. An extended length smooth ride coil spring provides increased ride height for better clearance. Rear lift is comprised of a 5" block and u bolt kit.

6" 2WD Ram Performance Crossmember System

Jeep Parts And Accessories - Our new 6" Performance System for late model Dodge Rams features extended length steering knuckles, attaching to stout lower control arm crossmembers for superior strength. The factory rack and pinion assembly is retained in the stock location for ease of installation, while smooth ride front coil springs provide a compliant highway ride.

GM 7" 2WD Ultimate Long Travel System

Jeep Parts And Accessories - The Ultimate Long Travel System combines travel system and 4" lift spindles for increased ground clearance and the peak of performance.

Ford 7.5" 2WD Ultimate Long Travel System

Jeep Parts And Accessories - By combining our 3.5" lift spindles and our long travel system, expect 7.5" of lift and unsurpassed ground clearance. Tire height increases to 35" tall.

Toyota 6" Ultimate

Jeep Parts And Accessories - 1995.5 -2004 2wd tacoma 5 Lug Our Ultimate system is comprised of our Lift Spindles and Upper Control Arm System to provide a tall ride height while providing increased suspension performance for offroad. Allows the use of 31" tall tires.

3.5" 4WD Spring Hanger Super Duty & Excursion

Jeep Parts And Accessories - Obtain 3.5" of front end lift without changing the front leaf springs. The super stout spring hangers replace the factory units without welding or cutting. Excursion models will require a 2" rear block kit to level off the ride height. 2001-04 Super Duty & all Excursions systems include replacement front frame crossmember and bumper brackets.

3.5” Spring and Shackle Hanger System

 This system features our heavy-duty front spring hanger brackets with replacement extended length shackles. The extended length shackles provide for an easy install with increased leaf spring flexibility. This system will provide a front end ride height increase of 3.5” without changing the leaf springs. Super Duty systems include a replacement front frame crossmember and bumper brackets.

Complete the Fabtech® look with a one-piece welded Desert Guard. All guards feature 2" diameter tubing with integrated aluminum skid plate, and two light tabs for auxiliary light tabs for auxiliary lights. Available in Black or Blue.

Fabtech Gription DVD

This video takes you throughout California, Nevada, Moab Utah, Japan, Norway and Sweden featuring the best highlights from the last two years of competition and off-road.

Fabtech Dual Shock System

• No Cutting required

We offer both front and rear Dual Shock system for the 2005 Super Duty. the front system attaches to the factory coil bucket without any cutting, while the rear system replaces the factory upper mounts completely. these bolt on shock systems allows the insallation of our Dirt Logic 2.25 or Performance Shocks for increased dampening capacity.

Fabtech 2.25” Dirt Logic Shock

Jeep Parts And Accessories - -2.25” OD Steel Body

-2.0” OD Billet Aluminum Piston

-7/8” Hardened Chrome Piston Rod

Fabtech’s new standard in large diameter mono tube shocks for lifted applications in the OE position as well as multiple shock applications, the 2.25 provides unparalled shock performance. The Dirt Logic 2.25 offers a supple highway ride with outstanding off-road dampening. Fabtech's 2.25" Dirt Logic shocks come with a preset valving of 60% compression and 40% rebound valving. Shocks include urethane bushing in the mounting eyes and are available with or without reservoirs.